Site Navigation

Your Account

Choose Language

Image 1/3: Move the Y-Axis as far forward as you can. Image 2/3: Then, with two hands, lift the front of the Heated bed up. Do not use much force when lifting up the heated bed, to prevent it from hitting the extruder, once the magnets separate. Image 3/3: Then, with two hands, lift the front of the Heated bed up. Do not use much force when lifting up the heated bed, to prevent it from hitting the extruder, once the magnets separate.
  • First, we will go over the steps of removing your heated print bed.

  • Move the Y-Axis as far forward as you can.

  • Then, with two hands, lift the front of the Heated bed up. Do not use much force when lifting up the heated bed, to prevent it from hitting the extruder, once the magnets separate.

Add Comment

Image 1/1: '''Before starting a print, please read the next steps on the proper print bed cable travel'''
  • To replace the print bed, we recommend connecting the heat bed wired, then attaching the back magnet, followed by the front magnets.

  • Before starting a print, please read the next steps on the proper print bed cable travel

Add Comment

  • This shows the bed cable traveling properly.

Add Comment

Finish Line

40 other people completed this guide.

Harrison Team RoBo 3D

Member since: 06/11/2014

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 14

All Time: 3,365

yourtext.